Sulfur Tester
Home
/Coal Testing Equipment
/Sulfur Tester
/
High quality 1.5L scale lab spray dryer equipment
Lab scale spray dryer is suitable for the production of in universities, research institutes and food and pharmaceutical chemical enterprises.
A microreactor is a small device used for chemical experiments and industrial production. Its main function is to simulate and reproduce the condition
With the increasing advancement of industrial technology and increasingly stringent environmental regulations, companies have stricter requirements fo
With the increasing requirements for quality and reliability of industrial products, salt spray testing, as a key link in testing the corrosion resist
Laboratory autoclave (also called autoclave, autoclave or pressure cooker) is a sterilization device widely used in biology, chemistry, medicine, food
Item NO.:
HYLH-VLead Time:
7daysShipping Port:
XiaMen
Technology Parameters
Note: 1mA-5mA, ±3°.
Product Name
HYLH-V SF6 Filling equipment
recycle
Recovery initial pressure≤0.8MPa
Final recovery pressure≤50KPa
Recovery time：for initial pressure 0.8MPa of 1 m 3 SF6 gas capacity，recovery to final pressure 50KPa， Recovery time is less than
2.5 hours
Gas filling
for initial pressure 133Pa of 1 m 3 SF6 gas capacity filled to 0.8MPa, Inflation time is less than 0.8 hour
vacuumize
The ultimate vacuum degree of the device is less than or equal to 10 Pa, for initial pressure 0.1MPa of 1 m 3 SF6 gas is
evacuated
to 133Pa . Required time less than 1.0 hour
storage
Storage capacity 0.05m
Nominal liquid storage 50kg
Maximum storage pressure 3.8 MPa
purification
For water content under 1000PPM（volume ratio）of SF6 gas, after one time recovery and purification of the device：water less than
60PPM（weight ratio）, oil less than10PPM（weight ratio)
Leakage rate per year
Leakage rate per year
Noise
≤75dB(A)SPL
temperature
-10℃- 40℃
Power supply
Ac three phase five wire system 50Hz 400V±10%
Power
≤5KW
Weight
545 kg
dimension
1450×810×1200mm
Products Show
Ollital Technology would like to establish win-win business cooperation with distributors all over the world.
Lowering down the sulfur content in the gasoline, diesel oil, heavy oils used in vehicles, ships, and airplanes will highly reduce pollution to atmosphere. Europe and our government have promulgated a series of standards on sulfur content of petroleum products to restrict its production and discharge.
It is suitable to determine the sulfur content of light petroleum products (gasoline, and kerosene, etc) whose vapor pressure is not more than 600 mmHg as per the GB/T380 standard.
Astm d4294 sulfur content analyzer is specially designed to determine sulfur content in the petroleum products. Adopts energy-dispersive principle, and with electrical, mechanical and microprcessor integration design, so it is rapid and accurate.
This product is manufactured in accordance with SH/T0304 ASTM D1275 electrical insulating oil corrosive sulfur test method and is suitable for the determination of corrosive sulfur in electrical insulating oil extracted from petroleum.
This ASTM D1551 Petroleum Oil Coke Sulfur in Oil Tester is designed according to ASTM D1551 and GB / T387, applicable to analyze the sulfur content in dark petroleum products(heavy fuel oil, petroleum coke and paraffin, etc.) through tube furnace method.
The main features of this instrument are: 5 samples can be tested at the same time, the size of exhaust gas and the position of alcohol lamp can be adjusted independently, and the stainless steel structure is durable.
online service
+86 15960821529
kevin@ollital.comkevinollital@gmail.com
+86 15960821529
+8615960821529
